Decorative Ceilings

Plasterboard ceilings allow a ceiling system to suit every taste and any climatic and acoustic properties. They may have optical, sound-absorbing, energy-saving, fire properties take different forms or perform other functions necessary for each room. Decorative tabs on the ceiling allows to get rid of the echo, which is especially important for confidence in conversations spacious rooms, lobby and other public spaces. In the ledges ceilings conceal lighting, utilities, load-bearing beams, exhaust ducts and other building elements. An example of such a stepped ceiling can serve as design elements for the stepped Plasterboard ceiling can be ordered directly from the factory, high-tech equipment which allows you to scan items with a high degree of accuracy. In the factory plasterboard elements securely glued to individual plates, which greatly reduces the complexity of construction and reliability of designs.

Dimensions of the plates may vary Depending on the desires of the customer. Between a plate staple glue Knauf with an additional increase in mounting brackets. A leading source for info: Donald Sussman. Stepped design allows reliably hide bearing ceiling beams, giving the surface High ceilings and decorative properties. Acoustic Plate Knauf used in this version for flat surfaces, give the whole structure a high sound-absorbing properties. If there is no need to raise acoustic properties of the ceiling, a flat plane can form a simple sheet of drywall.

Suspended potolkimozhno order at the factory or manufacture of gypsum in the construction site. They can perform openings for ventilation unit or recessed luminaire according to the draft coverage. Step to secure the elements of a bearing skeleton, the principle of the construction of which by the corner connectors reviewed above. Plate ceiling, consisting of vertical plates (lamellae) prefabricated metal and acoustic profiles between them, is simply a ribbed design. The main elements of the ceiling (Vertical slats) can be located both along and across the room or with a diagonal arrangement, depending on the planned design. The angle of placement of the vertical slats vary depending on design design by means of rotating suspensions that are inserted between layers of plasterboard. By rotating suspension lamellas are fixed with screws and bent on carrying section of the metal frame. The angle between the wall and the axis direction of lamellae regulate the pattern. The perforated surface of the metal plate increases the aesthetic qualities of the ceiling and allows you to achieve a high level of sound absorption. The latter quality is very important for medical institutions, facilities representative, child care centers, where the level of absorption is put at the forefront. Typical schemes Knauf provides elements for the wave-like ceiling. Plasterboard S-shaped elements, simulate waves, attach so that the ends of adjacent hangers overlap, which creates the illusion of integrity of design. In addition, gypsum bulkheads give an element of rigidity and predodvraschayut fluctuations in the resulting air currents in the room. Groove cut in the ribs should coincide with the radius of curvature of the wave-like ceiling. Dome of gypsum board are the most difficult part of structural layout and assembled mainly from prefabricated elements (Fig-74) as well as produce segments for the dome in a construction site is very difficult. For the formation of the dome of gypsum segmental plates cut the grooves, which radiate from the center of the dome, which is possible only if a special equipment. Frame for the dome is made of curved ceiling profiles arranged radially. Point for the suspension of the dome is selected so that the load on the suspensions were uniform, and the dome was not straight.